Feature Activation Key Screen; Configure Library: Encryption Activation Screen - Dell PowerVault TL2000 User Manual

Prerequisites for Library Managed Encryption:
v SAS and Fibre Channel LTO Ultrium 4 Tape Drive (Full Height or Half Height)
v Ultrium 4 Tape Cartridge
v Library firmware level 5.80 or higher
v Drive firmware level 77BE or higher
v Dell Encryption Key Manager application
Setting a Drive's Method of Encryption
1. Click Encryption (Configure Library → Encryption) in the left navigation pane.
Figure 4-24. Feature Activation Key screen
2. On the Encryption screen, enter the Feature Activation Key to make available
3. Click Activate to save the key and expand the screen for additional encryption
Figure 4-25. Configure Library: Encryption Activation screen
4. Select Enable SSL for EKM to enable Secure Sockets Layer for the Dell
5. Select an Encryption method for each logical library.
6. Select an Encryption policy for each logical library.
7. A primary and secondary EKM server can be set for each logical library. Each
4-22
Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide
Note: Fibre Channel is full height drive only.
the library managed encryption options.
settings.
Encryption Key Manager application.
v Without an encryption license key, select None or Application Managed
Encryption.
v With an encryption license key, select Library Managed Encryption.
v Encrypt All: This is the default policy. It encrypts all cartridges using the
default data keys specified in the EKM. This setting applies to all drives in a
TL2000/TL4000 logical library.
v Internal Label - Selective Encryption: Check your tape backup software
application documentation to see if this feature is supported.
v Internal Label - Encrypt All: Check your tape backup software application
documentation to see if this feature is supported.
partition has its own Encryption and EKM settings. Maintaining primary and
secondary EKM servers is desired for maximum availability of encrypted