Manage Library Menu; Configure Library: Restore Defaults Page; Manage Library: Move Media Page - Dell PowerVault TL2000 User Manual

Note: The TL2000/TL400 email address field cannot be empty (clear). The email
E-mail Domain
SMTP Server Address
Configure Library: Restore Defaults
This page allows the user to reset the configuration to the factory defaults.
Note: The user must restore factory defaults when library drive configurations are
Figure 5-44. Configure Library: Restore Defaults page

Manage Library Menu

Manage Library: Move Media
This page allows the user to move tape cartridges within the library. The source
and destination are selected and then the MOVE button in the center of the screen
is clicked to activate the move.
Figure 5-45. Manage Library: Move Media page
The following elements appear in the Source and Destination screens.
notification setup allows the user to turn off the feature by deselecting the
notify error and notify warnings boxes. The user can add an invalid email as
long as the email address format is correct (i.e. a@xxx.xxx).
Enter the email domain name of the individual you would like to receive
the errors and/or warnings.
Enter the address of the email server of the individual you would like to
receive the errors and/or warnings.
changed from a LTO full height to half height configuration in order for the
library to operate properly. If just adding a new drive to the configuration
the restore factory default is not required - only a power cycle of the library.
5-49
Chapter 5. Operations