Configure Menu; Control: Re-Inventory Menu - Dell PowerVault TL2000 User Manual

Choose "Left" or "Right" to unlock the corresponding cartridge magazine(s). The
magazines can now be removed from the library by gently pulling each magazine
out of the library. To replace a magazine, insert the back of the magazine into the
front of the library and gently push the magazine into the library. The magazine
will lock when inserted into the library.
If the magazines are not pulled out of the library within 15 seconds after they are
unlocked, the command will cancel and you will have to repeat the process to
unlock the magazines.
Control: Re-Inventory
Use this menu item to initiate a scan of the cartridges currently in the library.
Figure 5-11. Control: Re-Inventory menu
Note: It may take up to five minutes to complete the library inventory.

Configure Menu

The Configure Menu is used during the initial setup of your library and when
changes need to be made to your library's configuration. This menu contains the
following items:
v Logical Libraries
v Library Settings
v Drive
v Network
v Set Access PIN
v Set Date and Time
v Path Failover
v Restore Defaults
Configure: Logical Libraries
Use this menu item to select the number of logical libraries.
5-18
Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide
Control
Re-Inventory