Side Rails Installed; Sliding The Library Into The Rack - Dell EMC ML3 User Manual

Emc ml3 series tape library
Table of Contents

Advertisement

Figure 41. Side rails installed
3. Place the library at the front of the rack on the support angles of the rails and push it into the rack to
the back stop.
Figure 42. Sliding the library into the rack
4. If you are installing multiple modules, verify that this module is installed directly above or below its
adjacent module and is contained within the correct 3U volume. Remove the tape that is covering the
alignment pin lock/unlock lever on the rear of each module. The gap between modules must be less
than 4 mm.
45
Installing

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3555-l3a3555-e3aEmc ml3e

Table of Contents