Configure Library: Network Page; Warning Screen - Dell PowerVault TL2000 User Manual

Figure 5-38. Configure Library: Network page
2. Select a Protocol Stack - Choose IPv4 only, IPv6 only, or Dual Stack IPv4 &
Figure 5-39. Warning screen
3. Enter IPv4 settings (if applicable).
IPv6.
Note: When changes are made, the following Warning message will appear
when the Submit button is clicked.
The library must be rebooted or the changes will not take place.
a. DHCP Address - Click this item ON to have the IP Address of your library
automatically set by the library host computer. Leave unchecked and enter
the appropriate information for the IP Address, Network Mask, and
Gateway Address.
b. IP Address - An identifier for a computer or device on a TCP/IP network.
Networks using the TCP/IP protocol route messages based on the IP
address of the destination. The format of an IP address is a 32-bit numeric
5-45
Chapter 5. Operations