Download Print this page

Dell PowerVault TL2000 Release Notes

Tape library 3.90 firmware
Hide thumbs Also See for PowerVault TL2000:

Advertisement

TM
Dell
PowerVault
3.90 Firmware Release Notes
June 2007
These release notes document the A01 TL2000/TL4000 product feature updates and known
issues
These release notes document the 3.90 release of the Dell PowerVault TL2000/TL4000 Tape
Library firmware. These release notes provide information on new functionality, tape drive
compatibility, and the current known issues. This document is organized in following sections:

New Features

Component Firmware
Problems Resolved
Known Issues
Contacting Dell
***************************************************************************************************************
New Features
Introduction of LTO3 Half Height SAS drive support
Introduction of LTO4 SAS and FC drive support
Ability to convert the unit I/O and cleaning slots into storage slots
Support for SNMP
***************************************************************************************************************
Component Firmware
The following component firmware has been qualified with the 3.90 firmware.
Drives:
IBM LTO-3 (Fibre): 73P5
o
IBM LTO-3 (SCSI): 73P5
o
IBM LTO-3 (Half Height SAS): 73P7
o
IBM LTO-4 (SAS): 74H6
o
IBM LTO-4 (Fibre): 74H6
o
***************************************************************************************************************
Problems Resolved
PowerVault TL2000/TL4000 2
the RMU (Remote Management Unit)
TM
TL2000/TL4000 Tape Library
nd
generation support has a service tag field implemented in

Advertisement

loading

Summary of Contents for Dell PowerVault TL2000

  • Page 1: New Features

    These release notes document the A01 TL2000/TL4000 product feature updates and known issues These release notes document the 3.90 release of the Dell PowerVault TL2000/TL4000 Tape Library firmware. These release notes provide information on new functionality, tape drive compatibility, and the current known issues. This document is organized in following sections:...
  • Page 2: Known Issues

    PowerVault TL2000/TL4000 now restores the network to DHCP on when a factory default restore is executed Initial 0.80 Firmware release did not restore the network configurations settings to their factory defaults DHCP on when a factory defaults restore was performed in the unit. Issue is corrected in the 3.90 Firmware...
  • Page 3: Contacting Dell

    The cycle count will not be available to the user until the first full diagnostics cycle is complete. PowerVault Tl2000/Tl4000 RMU screen for cleaning drive # 1does not refresh to allow cleaning of drive # 2 When executing manual drive cleaning in the PowerVault TL4000/TL2000 on a unit that contains more than one drive, the drop down menus to select another drive in the unit remain grayed-out a successful cleaning drive # 1 via the RMU,.

This manual is also suitable for:

Powervault tl4000