The 2U Library Service Library: Upgrade - Dell PowerVault TL2000 User Manual

Each test will show a result of "Passed" or "Failed". Test results will clear:
v When the test is rerun
v When the library is rebooted
The time and date of the last test will appear below the Key Path Diagnostics
screen. If any of the tests fail, refer to "Maintenance Problems" on page 7-2 for
additional information.
Service Library: Upgrade Firmware
This page displays the current library and drive firmware versions. Firmware can
be downloaded to the host then uploaded to the drive in the library by using this
page.
In the first line you can see the actual loaded firmware revision or level installed
on the drive. Click Browse... to choose the firmware file you have downloaded
from the web site on the first drive you want to update (You can not update 2
drives at the same time). Be sure you choose the correct firmware for your drive
type. After pressing the Update button the file will be sent to the drive and the
drive will be upgraded.
Note: During the update no host drive action is possible. The drive update takes
Figure 5-54. The 2U library Service Library: Upgrade Firmware page
5-54
Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide
approximately 5 minutes. The system status panel (in the right of the
browser window) will change from "update" to "ready".