Mounting Brackets And Anchors For; Securing The Library In A Rack (One Bracket And Anchor On Each Side Of The Library); Front View Of A Rack Showing The Rails - Dell PowerVault TL2000 User Manual

Rack Installation:
1. Remove the mounting brackets ( 1 in Figure 10-24) and anchors ( 2 ) from
Figure 10-24. Mounting brackets and anchors for securing the library in a rack (one bracket and anchor on each side
of the library)
2. With assistance, slide the replacement library enclosure onto the metal rails that
Figure 10-25. Front view of a rack showing the rails installed
3. Tighten the mounting bracket screws ( 1 in Figure 10-12 on page 10-11) to
4. Proceed to "Completing the Installation of the Replacement Library Enclosure"
Desktop Installation:
1. Place the library in its permanent location.
2. Proceed to "Completing the Installation of the Replacement Library Enclosure"
10-24
Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide
each side of the defective library and install them on the replacement library
enclosure.
1
are already in position in the rack (see Figure 10-25).
anchor the replacement library enclosure to the rack.
on page 10-25.
on page 10-25.
2