HMS Networks Anybus Wireless Bolt Serial AWB2010 User Manual page 44

® ™
Anybus Wireless Bolt Serial
Serial Configuration
Figure 25. Serial port settings example
1. From the PC connected to Access Point 2, navigate to the built-in web interface of each Bolt Serial Client.
2. Select the Serial Settings tab.
3. Configure the serial port settings, see
6.3. Installing Multiple Bolt Serial Units
Figure 26. Installing Multiple Bolt Serial
When installing more than one Bolt Serial in the network infrastructure, configure the unit connected to the:
• Master device as the Access Point (AP).
• Slave as a Client.
Page 40 of 60
Set Up Serial Communication (page
Installing Multiple Bolt Serial Units
32).
SCM-1202-143 2.0