Advertisement
®
™
Anybus
Wireless Bolt Serial
Configuration
5. Configuration
5.1. Bolt Serial Built-In Web Interface
The Bolt Serial built-in web interface is used to configure, maintain and troubleshoot the Bolt Serial. Parameters
can be set individually or using pre-configured Easy Config modes.
The web interface is accessed by pointing a web browser to the IP address of the unit.
The default address is 192.168.0.99.
See also
Access the Built-In Web Interface (page
11).
Figure 4. System Overview page example
The System Overview page shows current settings and network connection status.
The Help page describes the AT commands that can be used for advanced configuration.
Page 10 of 60
SCM-1202-143 2.0
Advertisement
Related Manuals for HMS Networks Anybus Wireless Bolt Serial AWB2010
Related Products for HMS Networks Anybus Wireless Bolt Serial AWB2010
- HMS Networks Anybus Wireless Bolt CAN AWB2020-B
- HMS Networks Anybus Wireless Bolt IoT AWB1000
- HMS Networks Anybus Wireless Bolt IoT AWB1001
- HMS Networks AWB1500
- HMS Networks AWB1501
- HMS Networks Anybus Wireless Bridge II CAN AWB3006
- HMS Networks Anybus Wireless Bridge II Serial AWB3015-B
- HMS Networks Anybus AWB5300
Need help?
Do you have a question about the Anybus Wireless Bolt Serial AWB2010 and is the answer not in the manual?
Questions and answers