Advertisement
®
™
Anybus
Wireless Bolt Serial
5.9.3. WLAN Settings General
Figure 11. WLAN Settings page
Setting
Description
Enable
Enable/disable the WLAN interface.
Operating Mode
Choose operation as WLAN Client or Access Point.
When Access Point is selected, additional settings will be available.
Channel Bands
NOTE
The unit can be configured to scan on both the 2.4 GHz and 5 GHz channel bands but can only communicate on
one band at a time.
Choose to scan only the 2.4 GHz or 5 GHz channel band, or both (default).
Page 24 of 60
Configure Settings in the Built-In Web Interface
SCM-1202-143 2.0
Advertisement
Related Manuals for HMS Networks Anybus Wireless Bolt Serial AWB2010
Related Products for HMS Networks Anybus Wireless Bolt Serial AWB2010
- HMS Networks Anybus Wireless Bolt CAN AWB2020-B
- HMS Networks Anybus Wireless Bolt IoT AWB1000
- HMS Networks Anybus Wireless Bolt IoT AWB1001
- HMS Networks AWB1500
- HMS Networks AWB1501
- HMS Networks Anybus Wireless Bridge II CAN AWB3006
- HMS Networks Anybus Wireless Bridge II Serial AWB3015-B
- HMS Networks Anybus AWB5300
Need help?
Do you have a question about the Anybus Wireless Bolt Serial AWB2010 and is the answer not in the manual?
Questions and answers