Measuring big end bearing play
•
Measure crankpin with an external micrometer in
the thrust direction and at right angles to the
thrust direction.
•
Install bearing shells and assemble conrods.
•
Using tightening angle indicator,
BMW No. 11 2 210, tighten the big end bolts.
X
Tightening torque:
Big end bolts oiled
Joint torque.................................................. 20 Nm
Wrench angle .................................................... 80°
11.42
11 2 210
•
•
RS110350
a
Measure big end bearing with internal gauge in
thrust direction.
Enter measured values on record sheet and cal-
culate big end bearing play.
........................................... See Technical Data
RS110340
RS110360