Replacing Input Shaft Sealing Ring At Output End; Replacing Shaft Sealing Ring For Selector Drum; Replacing Sealing Ring For Selector Shaft - BMW R 1100 S Repair Manual

Replacing input shaft sealing ring at output end

•
Pierce the shaft sealing ring with awl,
BMW No. 00 8 583.
•
Screw the pull rod, BMW No. 00 8 581, into the
pierced hole and use impact weight,
BMW No. 00 8 582, to remove the shaft sealing
ring.
•
Install the new sealing ring with the sealing lips
facing inwards, using guide, BMW No. 23 4 722,
and impact driver, BMW No. 23 4 721.

Replacing shaft sealing ring for selector drum

•
Lever out the shaft sealing ring with a screwdriv-
er.
•
Install the new sealing ring with the sealing lip
facing inwards, using impact driver,
BMW No. 23 4 750.

Replacing sealing ring for selector shaft

•
Lever out the shaft sealing ring with a screwdriv-
er.
•
Install the new sealing ring with the sealing lip
facing inwards, using assembly sleeve,
BMW No. 23 4 612, and impact driver,
BMW No. 23 4 740.
23.8
23 4 612
23 4 722
00 8 582
00 8 583
23 4 750
23 4 740
23 4 721
00 8 581
C230160