Removing and installing rear wheel
•
Place the motorcycle on the auxiliary stand,
BMW No. 00 1 560.
•
Remove rear brake caliper.
e
Caution:
Use only wheel studs with length code 55.
Do not oil or grease wheel studs.
Contact faces on rear wheel drive and hub must be
clean and free of grease.
X
Tightening torques:
Screw in wheel studs handtight, then
tighten in diagonally opposite sequence
Initial tightening ............................................ 50 Nm
Final tightening ........................................... 105 Nm
36.8
00 1 560
S360040