Configuring Traffic Mirroring; Port Mirroring - Dell PowerConnect M8024 User Manual
Dell ethernet switch user's guide
Hide thumbs
Also See for PowerConnect M8024:
- Release note (9 pages) ,
- User configuration manual (1294 pages) ,
- Configuration manual (1246 pages)
Table of Contents
Advertisement
Modifying Broadcast Control
1. Open the Storm Control interface.
2. Click Show All.
The Storm Control Settings Table displays.
3. Check Edit for each port that Broadcast Control is to be modified.
4. Edit Broadcast Control as needed.
5. Click Apply Changes.
The storm control port parameters are saved to the switch.
Configuring Storm Control with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
•
Ethernet Configuration Commands
Configuring Traffic Mirroring
Traffic mirroring allows the user to configure the switch to send copies of packets on a port that is being
mirrored to the mirroring port. The mirroring can be port-based or flow-based.
Use the Traffic Mirroring menu page to define port mirroring sessions and configure flow-based
mirroring.
To display this page, click Switching > Traffic Mirroring in the tree view. The Traffic Mirroring menu
page contains links to the following features:
•
Port Mirroring
•
Flow Based Mirroring
Port Mirroring
Port mirroring selects the network traffic for analysis by a network analyzer. This is done for specific ports
of the switch. As such, many switch ports are configured as source ports and one switch port is configured
as a destination port. You have the ability to configure how traffic is mirrored on a source port. Packets
that are received on the source port, that are transmitted on a port, or are both received and transmitted,
can be mirrored to the destination port.
The packet that is copied to the destination port is in the same format as the original packet on the wire.
This means that if the mirror is copying a received packet, the copied packet is VLAN tagged or untagged
as it was received on the source port. If the mirror is copying a transmitted packet, the copied packet is
VLAN tagged or untagged as it is being transmitted on the source port.
To display the Port Mirroring page, click Switching > Traffic Mirroring > Port Mirroring in the tree
view.
296
Configuring Switching Information
:
Hide quick links:
Advertisement
Table of Contents
