Vlan Querier - Dell PowerConnect M8024 User Manual

VLAN Querier

Use the VLAN Querier page to specify the IGMP Snooping Querier settings for individual VLANs.
To display the VLAN Querier page, click Switching > Multicast Support > IGMP Snooping > VLAN
Querier in the tree view.
Figure 7-80. VLAN Querier
The VLAN Querier page contains the following fields:
• VLAN ID — Specifies the VLAN for the IGMP Snooping Querier configuration.
• VLAN Mode — Enables or disables the IGMP Snooping Querier on the VLAN selected in the VLAN
ID field.
• Querier Election Participate Mode — Enables or disables the IGMP participation in election mode by
the Snooping Querier. When this mode is disabled, upon seeing another querier of same version in the
VLAN, the Snooping Querier transitions to non-querier state. When this mode is enabled, the
Snooping Querier participates in querier election, where in the lowest IP address wins the querier
election and operates as the querier in that VLAN. The other querier transitions to non-querier state.
• Snooping Querier VLAN Address — Specifies the Snooping Querier address to be used as source
address in periodic IGMP queries sent on the specified VLAN.
Configuring Switching Information
365