Port Mirroring - Dell PowerConnect 3048 User Manual

To add a port to a trunk, click the toggle button below the port number
until the correct trunk number appears.
NOTICE: All ports participating in a trunk must be operating in Full Duplex
mode.
NOTICE: All ports participating in a trunk should have the same VLAN and
CoS settings.
To save any changes you make in this page, click Apply. To reset these fields
to their current value, click Reload.

Port Mirroring

From the Port Mirroring page, you can enable or disable port mirroring. You
can also set the source port and monitor ports. Port mirroring helps you
debug a network.
The following options are available:
• Port Mirroring is — Enable or disable port mirroring.
59
Web I n t e r f a c e