Dell PowerConnect M8024 User Manual page 350

Figure 7-68. LACP Parameters
The LACP Parameters page is divided into two sections: Global Parameters and Port Parameters.
Following are the fields on this page:
Global Parameters
LACP System Priority (1–65535) — Indicates the LACP priority value for global settings. The default
•
value is 1.
Port Parameters
• Interface— Specifies the unit and port number to which timeout and priority values are assigned.
• LACP Port Priority (1–65535) — Specifies LACP priority value for the specified port. The default
value is 1.
• LACP Timeout — Specifies Administrative LACP timeout. Possible values are:
– Short — Specifies a short timeout value.
– Long — Specifies a long timeout value. This is the default.
Defining Link Aggregation Parameters
1. Open the LACP Parameters page.
2. Complete the fields as needed.
3. Click Apply Changes.
The parameters are defined, and the device is updated.
348
Configuring Switching Information