Viewing RMON History Control Using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
•
RMON Commands
RMON History Table
Use the RMON History Table page to display interface-specific statistical network samplings. Each table
entry represents all counter values compiled during a single sample.
To display the RMON History Table page, click Statistics/RMON > RMON > History Table in the
tree view.
Figure 8-11. RMON History Table
The RMON History Table page contains the following fields:
•
History Entry No. — Selects the history entry number to display on the RMON History Table.
•
Owner — Displays RMON statistics group owner name, if available.
•
Source Interface — Indicates the Interface or LAG where the statistics are being collected.
Max No. of Samples to Keep — Determines the length of the list in the History table for each History
•
Entry No.
•
Sampling Interval — Sets the time in seconds between successive samples.
•
Sample No. — Indicates the specific sample the information in the table reflects.
436
Viewing Statistics and Remote Monitoring
: