Modifying LLDP Interface Settings for Multiple Ports
1. Open the LLDP Configuration page.
2. Click Show All.
The LLDP Interface Settings Table displays.
3. Click Edit for each Unit/Port to modify.
4. Edit the LLDP Interface fields as needed.
5. Click Apply Changes.
The LLDP Interface settings are modified, and the device is updated.
Configuring LLDP Configuration with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
•
LLDP Commands
LLDP Statistics
Use the LLDP Statistics page to view LLPD-related statistics.
To display the LLDP Statistics page, click Switching > LLDP > LLDP Statistics in the tree view.
Figure 7-96. LLDP Statistics
380
Configuring Switching Information
: