Dell PowerConnect M8024 User Manual page 216

Read — Select a view that restricts management access to viewing the contents of the agent. If no
–
view is selected, all objects except the community-table, SNMPv3 user and access tables can be
viewed.
– Write — Select a view that permits management read-write access to the contents of the agent.
– Notify — Select a view that permits sending SNMP traps or informs.
Adding SNMP Groups
1. Open the Access Control Configuration page.
2. Click Add.
The Add an Access Control Configuration page displays:
Figure 6-94. Add an Access Control Configuration
3. Define the fields as needed.
4. Click Apply Changes.
The group is added, and the device is updated.
Displaying the Access Table
1. Open the Access Control Configuration page.
2. Click Show All.
The Access Table page displays:
214
Configuring System Information