Dell PowerConnect M8024 User Manual page 218

Figure 6-96. SNMPv3 User Security Model (USM)
The SNMPv3 User Security Model (USM) page contains the following fields:
• User Name — Contains a list of user-defined user names.
• Group Name — Contains a list of user-defined SNMP groups. SNMP groups are defined in the Access
Control Group page.
• Engine ID — Selects whether the selected user is associated to a local or to a specified remote
SNMPv3 enabled device.
– Remote Engine ID — Indicates that the user is configured on a remote SNMPv3 enabled device.
• Authentication Method — Specifies the authentication method used to authenticate users. The
possible field values are:
None — No user authentication is used.
–
– MD5 — Users are authenticated using the HMAC-MD5-96 authentication level. The user should
specify a password.
SHA — Users are authenticated using the HMAC-SHA-96 authentication level. The user should
–
enter a password.
• Password — Modifies the user defined password for the group. Passwords can contain a maximum of
32 characters. Passwords are defined only if the authentication method is MD5 or SHA Password. You
define the password on the Add Local User page.
216
Configuring System Information