Dell PowerConnect M8024 User Manual page 689

IGMP Global Configuration
Use the IGMP Global Configuration page to set IGMP on the system to active or inactive.
To display the page, click IP Multicast > IGMP > Global Configuration in the tree view.
Figure 12-25. IGMP Global Configuration
The IGMP Global Configuration page contains the following field:
• Admin Mode — Select Enable or Disable from the drop-down menu to set the administrative status
of IGMP in the router to active or inactive. The default is Disable.
Setting the IGMP Mode
1. Open the IGMP Global Configuration page.
2. Set Admin Mode to Enable or Disable, to turn IGMP on or off.
3. Click Apply Changes.
The IGMP configuration is saved, and the device is updated.
Setting IGMP Mode using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• IGMP Commands
Configuring IP Multicast
687