Dell PowerConnect M8024 User Manual page 425

The Interface Statistics page contains the following fields:
• Interface — Select physical interface (unit, port) or LAG interface for which statistics is displayed.
• Refresh Rate — Specifies amount of time that passes before statistics are refreshed. The possible field
values are No Refresh, 15, 30 and 60 seconds. Default is No Refresh.
Received Statistics
• Total Bytes (Octets) — Displays the total number of octets received on the selected interface.
• Unicast Packets — Displays the total number of Unicast packets received on the selected interface.
Multicast Packets — Displays the total number of Multicast packets received on the selected
•
interface.
• Broadcast Packets — Displays the total number of Broadcast packets received on the selected
interface.
• Packets with Errors — Displays the total number of packets with errors received on the selected
interface.
Transmit Statistics
• Total Bytes (Octets) — Displays the total number of octets transmitted on the selected interface.
• Unicast Packets — Displays the total number of Unicast packets transmitted on the selected interface.
• Multicast Packets — Displays the total number of Multicast packets transmitted on the selected
interface.
• Broadcast Packets — Displays the total number of Broadcast packets transmitted on the selected
interface.
Displaying Interface Statistics
1. Open the Interface Statistics page.
2. Specify an interface.
Statistics for specified interface display.
Viewing Interface Statistics Using the CLI Command
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• Ethernet Configuration Commands
Viewing Statistics and Remote Monitoring
423