Dell PowerConnect M8024 User Manual page 336

Admit Tag Only — The LAG only accepts tagged packets.
–
– Admit All — Tagged and untagged packets are both accepted by the LAG.
• Ingress Filtering — Enables or disables Ingress filtering by the LAG. Ingress filtering discards packets
where the VLAN tag does not match the LAG VLAN membership.
Assigning VLAN LAG Settings
1. Open the VLAN LAG Settings page.
2. Select a LAG from the LAG drop-down menu
3. Complete the remaining fields on the page.
4. Click Apply Changes.
The VLAN LAG parameters are defined, and the device is updated.
Displaying the VLAN LAG Table
1. Open the VLAN LAG Settings page.
2. Click Show All.
The VLAN LAG Table displays.
Figure 7-57. VLAN LAG Table
334
Configuring Switching Information