Dell PowerConnect M8024 User Manual page 431

Utilization Summary
Use the Utilization Summary page to display interface utilization statistics.
To display the page, click Statistics/RMON > Table Views > Utilization Summary in the tree view.
Figure 8-5. Utilization Summary
The Utilization Summary page contains the following fields:
• Unit — Specifies the unit for which statistics are displayed.
• Refresh Rate — Specifies amount of time that passes before statistics are refreshed. The possible field
values are No Refresh, 15, 30, and 60 seconds. Default is No Refresh.
• Interface — Specifies the interface for which statistics are displayed.
• Interface Status — Displays status of the interface.
• Interface Utilization % — Displays network interface utilization percentage based on the duplex
mode of the interface. The range of this reading is from 0 to 200%. The maximum reading of 200% for
a full duplex connection indicates that 100% of bandwidth of incoming and outgoing connections is
used by the traffic travelling through the interface. The maximum reading for a half duplex connection
is 100%.
• Unicast Received % — Displays percentage of Unicast packets received on the interface.
• Non Unicast Packets Received % — Displays percentage of non-Unicast packets received on the
interface.
• Error Packets Received % — Displays number packets with errors received on the interface.
Viewing Statistics and Remote Monitoring
429