Dell PowerConnect M8024 User Manual page 582

Dell ethernet switch user's guide

Hide thumbs Also See for PowerConnect M8024:

Table of Contents

Configuring a DHCPv6 Interface Using the CLI Commands

For information about the CLI commands that perform this function, see the following chapter in the

CLI Reference Guide

DHCPv6 Commands

Configuring a DHCPv6 Interface for Server Interface Mode

1. Open the DHCPv6 Interface Configuration page.

2. Specify the desired Interface, and select Server from the Interface Mode drop down menu.

The following screen appears:

Figure 10-13. DHCPv6 Interface Configuration - Server

3. Modify the fields as needed.

4. Click Apply Changes.

The DHCPv6 interface configuration is saved, and the device is updated.

Configuring IPv6

Show Quick Links

Table of Contents

Powerconnect m6220 Powerconnect m6348