Dell PowerConnect M8024 User Manual page 215

Figure 6-93. Access Control Group
The Access Control Group page contains the following fields:
• Group Name — Contains a list of user-defined groups to which access control rules are applied. A
group name can contain a maximum of 30 alphanumeric characters.
• Security Model — Defines the SNMP version attached to the group. The possible field values are:
SNMPv1 — SNMPv1 is defined for the group.
–
– SNMPv2 — SNMPv2 is defined for the group.
– SNMPv3 — SNMPv3 User Security Model (USM) is defined for the group.
• Security Level — The security level attached to the group. Security levels apply to SNMPv3 groups
only. The possible field values are:
– noauth no priv — Neither Authentication nor Privacy security levels are assigned to the group.
– auth nopriv — Authenticates SNMP messages without encrypting them.
– auth priv — Authenticates SNMP messages and encrypts them.
• Context Prefix (1
to 30 characters of the context name.
• Operation — Defines group access rights. The possible field values are:
30) — This field permits the user to specify the context name by entering the first 1
–
Configuring System Information
213