The DHCP Relay Interface Statistics page contains the following fields:
•
Interface — Select the slot/port to configure this feature on.
•
Untrusted Server Msgs With Option-82 — If the selected interface is configured in untrusted mode,
this field shows the number of messages received on the interface from a DHCP server that contained
Option 82 data.These messages are dropped.
•
Untrusted Client Msgs With Option-82 — If the selected interface is configured in untrusted mode,
this field shows the number of messages received on the interface from a DHCP client that contained
Option 82 data.These messages are dropped.
•
Trusted Server Msgs Without Option-82 — If the selected interface is configured in trusted mode,
this field shows the number of messages received on the interface from a DHCP server that did not
contain Option 82 data. These messages are dropped.
•
Trusted Client Msgs Without Option-82 — If the selected interface is configured in trusted mode,
this field shows the number of messages received on the interface from a DHCP client that did not
contain Option 82 data. These messages are dropped.
Use the buttons on the page to perform the following:
•
Click Clear to set statistics for this port to their initial values.
Click Clear All to set statistics for all ports to their initial values.
•
Viewing DHCP Relay Information With CLI Commands
For information about the CLI commands that perform this function, refer to the following chapter in
CLI Reference Guide
the
•
L2 DHCP Relay Agent Commands
412
Configuring Switching Information
: