There are two tables in this section of the page:
•
Ports — Displays and assigns VLAN membership to ports. To assign membership, click in Static for a
specific port. Each click toggles between U, T, and blank. See the following table for definitions.
•
LAGs — Displays and assigns VLAN membership to LAGs. To assign membership, click in Static for a
specific LAG. Each click toggles between U, T, and blank. See the following table for definitions.
Table 7-1. VLAN Port Membership Definitions
Port Control
Definition
Tagged: the interface is a member of a VLAN. All
T
packets forwarded by the interface are tagged.
The packets contain VLAN information.
Untagged: the interface is a VLAN member.
U
Packets forwarded by the interface are untagged.
Forbidden: indicates that the interface is
F
forbidden from becoming a member of the
VLAN.
Blank: the interface is not a VLAN member.
Blank
Packets associated with the interface are not
forwarded.
Adding New VLANs
1. Open the VLAN Membership page.
2. Click Add.
The Add VLAN page displays.
Figure 7-50. Add VLAN
3. Enter a new VLAN ID and VLAN Name.
4. Click Apply Changes.
The new VLAN is added, and the device is updated.
Configuring Switching Information
325