Sntp Server - Dell PowerConnect M8024 User Manual

Removing an Authentication Key
1. Open the SNTP Authentication page.
2. Click Show All.
The Authentication Key Table page displays.
3. Select an Authentication Key Table entry by checking its the Remove check box.
4. Click Apply Changes.
The entry is removed, and the device is updated.
Defining SNTP Authentication Settings Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• Clock Commands.

SNTP Server

Use the SNTP Server page to view and modify information for enabling SNTP servers, and to add new
SNTP servers.
To display the SNTP Server page, click System > SNTP > SNTP Server in the tree view.
Figure 6-13. SNTP Servers
Configuring System Information
119