Omreport Physical Disk Status - Dell Command Line Interface User Manual

Table 8-12. omreport EMM Commands (continued)
Required Command Levels (1, 2, 3)
and name=value pair

omreport Physical Disk Status

Table 8-13. omreport Physical Disk Commands
Required Command Levels (1, 2, 3) and
name=value pair
omreport storage pdisk controller=id
where id is the controller number. For
example: controller=0
Optional name=value pairs
controller=id enclosure=
<ENCLOSUREID>
info=emms index=n
where id is the controller number
and the enclosure number and "n"
is the number of an EMM.
For example: controller=0
enclosure=2
info=emms index=1
Optional name=value pairs
connector=id
where id is the connector
number. For example:
connector=1
vdisk=id
where id is the virtual disk
number. For example: vdisk=1
pdisk=connectorID : targetID
| connectorID : enclosureID :
slotID
where connectorID:targetID is
the connector number and the
physical disk number and
connectorID:enclosureID:slotID
is the connector number,
enclosure number, and slot
number.
For example: pdisk=0:2 or
pdisk=0:1:2
Use
Displays the specified EMMs.
Use
Displays all physical disks
attached to the specified
controller.
Displays all physical disks
attached to the specified
connector on the controller.
Displays all physical disks
included in the specified virtual
disk on the controller.
Displays the specified physical
disk on the specified connector
on the controller.
Using the Storage Management Service
143