Dell Command Line Interface User Manual page 78

Table 4-12. omconfig chassis remoteaccess (continued)
name=value pair 1
config=
config=nic
(continued)
config=serial
78
omconfig: Managing Components Using the Instrumentation Service
name=value pair 2
vlanenable=true | false
vlanid=number
vlanpriority=number
baudrate=9600 | 19200 | 38400 | 57600
| 115200
flowcontrol=none | rtscts
Description
true: Enables the virtual LAN identification.
false: Disables the virtual LAN identification.
number: Virtual LAN identification in the
range of 1 to 4094.
number: Priority of virtual LAN identification
in the range of 0 to 7.
9600: Sets connection speed to 9600 bits
per second.
19200:Sets connection speed to 19200 bits
per second.
38400: Sets the volatile and nonvolatile
connection speed to 38400 bits per second.
57600: Sets the volatile and nonvolatile
connection speed to 57600 bits per second.
115200: Sets the volatile and nonvolatile
connection speed to 115200 bits per second.
NOTE:
Baud rates of 9600 and 19200 are
supported on PowerEdge 1800, 1850, 2800, and
2850 systems.
Baud rates of 9600, 19200, 38400, and 57600 are
supported on PowerEdge x9xx systems.
Baud rate of 115200 is supported on certain
systems that have a DRAC 5 installed.
none: No control over the flow of
communication through the serial port.
rtscts: RTS is ready to send and CTS is clear
to send.