Table 8-7. omreport Connector Commands (continued)
Required Command Levels (1, 2, 3) Optional name=value pairs
omreport Enclosure Status
Table 8-8. omreport Enclosure Commands
Required Command Levels (1, 2, 3) Optional name=value pairs
omreport storage enclosure
omreport Temperature Probe Status
Table 8-9. omreport Temperature Probe Commands
Required Command Levels (1, 2, 3)
and name=value pair
omreport storage enclosure
140
Using the Storage Management Service
controller=id
where id is the controller
number. For example:
controller=0
connector=id
where id is the connector
number. For example:
connector=0
controller=id enclosure=
<ENCLOSUREID>
where id is the controller number
and the enclosure number. For
example: controller=0
enclosure=2
Optional name=value pairs
controller=id enclosure=
<ENCLOSUREID>
info=temps
where id is the controller number
and the enclosure number. For
example: controller=0 enclosure=2
Use
Displays information for the specified
connector on the controller.
Use
Displays property information for
all enclosures attached to the
system.
Displays the specified enclosure
and its components.
Use
Displays property information
for all enclosures attached to
the system.
Displays the temperature probes
for the specified enclosure.