Omreport Global Information (Smart Thermal Shutdown Status); Omreport Battery Status; Omreport Connector Status - Dell Command Line Interface User Manual

omreport Global Information (Smart Thermal Shutdown Status)

Table 8-5. omreport Global Information Commands
Required Command Levels (1, 2, 3) Optional name=value pairs
omreport storage globalinfo

omreport Battery Status

Table 8-6. omreport Battery Commands
Required Command Levels (1, 2, 3) Optional name=value pairs
omreport storage battery

omreport Connector Status

Table 8-7. omreport Connector Commands
Required Command Levels (1, 2, 3) Optional name=value pairs
omreport storage connector
controller=id
where id is the controller
number. For example:
controller=0
controller=id
where id is the controller
number. For example:
controller=0
Use
Displays whether smart thermal
shutdown is enabled or disabled. See
the "omconfig Global Enable Smart
Thermal Shutdown" command for
more information.
Use
Displays all batteries present on all
controllers on the system. (Some
controllers do not have batteries).
Displays the battery on the specified
controller.
Use
Displays all connectors present on all
controllers on the system.
NOTE:
This command works only when
the controller id is specified.
Displays the connector on the specified
controller.
Using the Storage Management Service
139