Omconfig Chassis Info - Dell Command Line Interface User Manual

Table 4-8. omconfig chassis frontpanel
name=value pair 1
lcdindex=<index>
config=none | default
| custom
text=<custom text>
nmibutton
powerbutton

omconfig chassis info

Use the omconfig chassis info command to enter an asset tag name for your system and a chassis name
for your system. If your system is a modular one, you can enter asset tag names for modular components
as well. Table 4-9 shows the valid parameters for the command.
Table 4-9. omconfig chassis info
name=value pair
index=<n>
tag=<text>
name=<text>
In the following example, the asset tag for the main system chassis is being set to buildsys:
omconfig chassis info index=0 tag=buildsys
Index 0 always defaults to main system chassis. The following command omits index=n, but
accomplishes the same thing:
omconfig chassis info tag=buildsys
An acceptable command, when executed, results in the following message:
Chassis info set successfully.
For some chassis, you can assign a different name. You cannot rename the main system chassis. In the
example below, the command renames chassis 2 from storscsi1 to storscsia:
omconfig chassis info index=2 name=storscsia
name=value pair 2
NA
NA
NA
enable=true | false
enable=true | false
Description
Number of the chassis whose asset tag or name you are setting.
Asset tag in the form of alphanumeric text. Letters or numbers
cannot exceed 10 characters.
Name of the chassis.
omconfig: Managing Components Using the Instrumentation Service
Description
Specify the LCD line number.
none: Set the LCD text to none.
default: Set the LCD text to default.
custom: Set the LCD text to custom.
Set the custom text for LCD when config=custom.
true: Enables the NMI button on the system.
false: Disables the NMI button on the system.
true: Enables the Power button on the system.
false: Disables the Power button on the system.
73