Adding Outsource Information; Example Command For Adding Outsource Information - Dell Command Line Interface User Manual

Adding Outsource Information

Outsourcing is the practice of contracting with another business to maintain the system in good working
order. Table 5-6 shows the valid parameters for adding outsource information.
Table 5-6. omconfig system assetinfo info=outsource
Command Command Command
level 1 level 2 level 3
omconfig
system
assetinfo

Example Command for Adding Outsource Information

To provide a value for an outsource parameter, type a command of the form: omconfig system assetinfo
info=outsource <name=value pair 2>. For example, type:
omconfig system assetinfo info=outsource providerfee=75
The following message appears:
Asset information set successfully.
You can enter more than one omconfig system assetinfo command at the same time, as long as all of the
parameters for name=value pair 2 belong to the same name=value pair 1. For an example, see "Example
Commands for Adding Acquisition Information."
name=value pair 1 name=value pair 2
info=outsource
levels=<n>
problemcomponent=
<component>
providerfee=<providerfee> Amount of money charged for
servicefee=<servicefee>
signauth=<name>
omconfig system assetinfo: Editing Cost of Ownership Values
Use
Levels of service offered by the
provider.
System component that
requires maintenance.
maintenance.
Amount of money charged for
service.
Person who signed or
authorized the service.
107