Omconfig Rac Remote; Example Command; Omconfig Rac Rmdialinuser - Dell Command Line Interface User Manual

omconfig rac remote

Use the omconfig rac remote command to specify the remote features property values. Table 7-9 shows
the valid parameters for the command.
Table 7-9. omconfig rac remote
name=value pair
floppytftpenable=true | false
floppytftpipaddr=<text>
floppytftppath=<text>
fwupdatetftpipaddr=<text>
fwupdatetftppath=<text>

Example Command

The following example sets one name=value pair.
Type:
omconfig rac remote floppytftpenable=true
The following message appears:
Command Successful. Please reset RAC card!

omconfig rac rmdialinuser

Use the omconfig rac rmdialinuser command to remove a dial-in user. Table 7-10 shows the valid
parameters for the command.
Table 7-10. omconfig rac rmdialinuser
name=value pair
username=<text>
index=<n>
Description
true: Enables remote boot.
false: Disables remote boot.
Sets the floppy TFTP address.
Sets the floppy TFTP path.
Sets the firmware TFTP address.
Sets the directory path on the TFTP server where the
firmware update images reside.
Description
Specifies the user name of entry which is to be deleted. If no
user name is specified, an index must be specified.
Specifies the index of the entry which is to be deleted. If no
index is specified, a user name must be specified.
omconfig rac: Managing the Remote Access Controller
129