Omreport Chassis Slots; Omreport Chassis Temps - Dell Command Line Interface User Manual

Table 3-5. omreport chassis remoteaccess
name=value pair
config=advsol
config=nic
config=serial
config=serialoverlan
config=terminalmode
config=user

omreport chassis slots

Use the omreport chassis slots command to view properties of your system's slots.
Type:
omreport chassis slots index= n
The index parameter is optional. If you do not specify the index, Server Administrator displays
properties for all of the slots in your system. If you specify the index, Server Administrator displays
properties for a specific slot.
For each slot in the system, values display for the following fields: Index, Slot ID, Adapter, and
Data Bus Width.
Index is the number of the slot in the system.
Slot ID is the silk screen name printed on your system's motherboard next to the slot. Alphanumeric text
uniquely identifies each slot in the system.
Adapter refers to the name and or type of the card that fits into the slot, for example, a storage array
controller, SCSI adapter, or HBA.
Data bus width is the width, in bits, of the information pathway between the components of a system.
Data bus width range is 16 to 64 bits.

omreport chassis temps

Use the omreport chassis temps command to view properties of your system's temperature probes.
When you type:
omreport chassis temps index= n
The index parameter is optional. If you do not specify the index, Server Administrator displays a
summary of status, readings, and thresholds set for any temperature probes that might be present on
your system. If you specify the index, Server Administrator displays a summary for a specific
temperature probe.
38
omreport: Viewing System Status Using the Instrumentation Service
Description
Reports advanced BMC or RAC information on a serial over local area
network (LAN) connection.
Reports BMC or RAC information for the LAN.
Reports serial port information for BMC or RAC.
Reports BMC or RAC information on a serial over LAN connection.
Reports terminal mode settings for the serial port.
Reports information on BMC or RAC users.