Dell Command Line Interface User Manual page 24

Table 3-1. omreport Command Level 1, Level 2, and Level 3 (continued)
Command Command
level 1 level 2
rac
24
omreport: Viewing System Status Using the Instrumentation Service
Command User
level 3 privilege
required
alertaction U, P , A
alertlog U, P , A
assetinfo U, P , A
cmdlog U, P , A
esmlog U, P , A
events U, P , A
operatingsystem U, P , A
pedestinations U, P , A
platformevents U, P , A
recovery P , A
shutdown P , A
summary U, P , A
thrmshutdown P , A
version U, P , A
U, P , A
Use
Shows warning and failure threshold values, as
well as actions that have been configured when
an essential component detects a warning or
failure state.
Allows the administrator to show the alert log.
Shows cost of ownership information for
your system.
Allows the administrator to show the
command log.
Allows the administrator to show the
hardware log.
Shows the system's Simple Network
Management Protocol (SNMP) event settings.
Shows the name and version of your
operating system.
Shows destinations where alerts for platform
events are configured to be sent.
Shows the system's response for each listed
platform event.
Shows how your system is configured to respond
to a hung operating system.
Shows how the shutdown action is to be
performed.
Shows key facts for all system components,
including main system chassis, software, and
storage.
Shows what shutdown action, if any, is to be
taken when a temperature warning or failure
condition is detected.
Shows a summary for all updatable components
on your system.
See "omreport rac: Viewing Remote Access
Controller Components."