Omconfig System Webserver - Dell Command Line Interface User Manual

Severity
In the context of configuring events, severity determines how severe an event must be before Server
Administrator notifies you of the event for a component type. When there are multiple components of
the same type in the same system chassis, you can also specify whether you want to be notified for event
severity according to the number of the component by using the index=
the valid severity parameters.
Table 4-26. System Event Severity Parameters
Command
omconfig system events type=<component name>
severity=info
omconfig system events type=<component name>
severity=warning
omconfig system events type=<component name>
severity=critical
omconfig system events type=<component name>
severity=none
Index
Index refers to the number of an event for a particular component. Index is an optional parameter.
When you omit the index parameter, events are configured for all components of the specified type, such
as all fans. When a system contains more than one fan, for example, you can enable or disable event
notification for a particular fan. An example command is as follows:
omconfig system events type=fan index=0 severity=critical
As a result of the example command, Server Administrator will send an SNMP trap only when the first
fan in the system chassis (index 0) has reached critical fan RPMs.

omconfig system webserver

Use the omconfig system webserver command to start or stop the Web server. Table 4-27 shows the valid
parameters for the command.
Table 4-27. Web Server Configuration Parameters
name=value pair
action=start
action=stop
action=restart
96
omconfig: Managing Components Using the Instrumentation Service
Description
Starts the Web server.
Stops the Web server.
Restarts the Web server.
<n>
Result
Enables notification for
informational, warning,
and critical events.
Enables notification for
warning and critical
events.
Enables notification for
critical events only.
Disables event
notification.
parameter. Table 4-26 shows
Description
Least restrictive form of event
notification.
Omits informational event
notification, for example, when a
component returns to normal status.
Restrictive form of event
notification.
No event notification.