Table of Contents
Advertisement
Adding Support Information
Support refers to technical assistance that the system user can seek when the user desires guidance on
the proper use of a system to perform tasks. Table 5-9 shows the valid parameters for adding
support information.
Table 5-9. omconfig system assetinfo info=support
Command
Command
level 1
level 2
omconfig
system
Example Command for Adding Support Information
To provide a value for a support parameter, type a command of the form: omconfig system assetinfo
info=support <name=value pair 2>. For example, type:
omconfig system assetinfo info=support outsourced=true
The following message appears:
Asset information set successfully.
You can enter more than one omconfig system assetinfo command at the same time, as long as all of the
parameters for name=value pair 2 belong to the same name=value pair 1. For an example, see "Example
Commands for Adding Acquisition Information."
110
omconfig system assetinfo: Editing Cost of Ownership Values
Command
name=value pair 1 name=value pair 2 Use
level 3
assetinfo
info=support
automaticfix=
Name of any application used to fix a
<programname>
problem automatically.
helpdesk=
The help desk name or contact
<text>
information such as a phone number,
e-mail address, or web site address.
outsourced=true
Whether an external business entity
| false
provides technical support or the system
owner's employees provide technical
support.
type=network |
Whether support is for network attached
storage
devices or for storage devices.
Advertisement
Table of Contents
