Table of Contents
Advertisement
Command level 1 is omreport, command level 2 is about, and the name=value pair is
details=true.
Many commands use command level 1, command level 2, and command level 3, but do not require any
parameters (name=value pairs). Most omreport commands are of this type. For example:
omreport system alertaction
causes a list of alert actions that are configured for components on your system to be displayed.
The most complex commands have all three command levels and can have multiple name=value
pairs. An example of two name=value pairs:
omconfig system assetinfo info=depreciation duration=3
An example of nine name=value pairs:
omconfig system assetinfo info=acquisition
purchasecost=
< mmddyy > ponum=
expensed=< yes | no > costcenter=< text >
In each section, command syntax and other information about commands is formatted with any of the
following fields that apply:
command level 1
command level 2 command level 3 name=value pair 1
18
Introduction
<n>
<n>
waybill=
<n>
signauth=< text >
installdate=< mmddyy > purchasedate=
name=value pair 2
Advertisement
Table of Contents
