Adding Lease Information; Example Command For Adding Lease Information - Dell Command Line Interface User Manual

Adding Lease Information

A lease is an agreement to pay for the use of a system for a specified period of time. The lessor retains
ownership of the system. Table 5-4 shows the valid parameters for the command.
Table 5-4. omconfig system assetinfo info=lease
Command Command Command
level 1 level 2 level 3
omconfig
system
assetinfo

Example Command for Adding Lease Information

To provide a value for a lease parameter, type a command of the form: omconfig system assetinfo info=
lease <name=value pair 2>. For example, type:
omconfig system assetinfo info=lease value=4500
The following message appears:
Asset information set successfully.
You can enter more than one omconfig system assetinfo command at the same time, as long as all of the
parameters for name=value pair 2 belong to the same name=value pair 1. For an example, see "Example
Commands for Adding Acquisition Information."
name=value pair 1 name=value pair 2
info=lease
buyout=<amount>
lessor=<lessor>
multischedule=true |
false
ratefactor=<factor>
value=<residual>
omconfig system assetinfo: Editing Cost of Ownership Values
Use
Amount of money paid to purchase
a system from a lessor.
Business entity that is leasing the
system out.
Whether cost of leasing the system
is computed by more than one rate
schedule.
Factor used to calculate the lease
payment.
Fair market value of the system at
the end of the lease period.
105