Example Command; Omconfig Rac Rmdialoutuser - Dell Command Line Interface User Manual

Example Command

The following example sets one name=value pair.
Type:
omconfig rac rmdialinuser username=jdoe
The following message appears:
Command Successful. Please reset RAC card!

omconfig rac rmdialoutuser

Use the omconfig rac rmdialoutuser command to remove a dial-out user. Table 7-11 shows the valid
parameters for the command.
Table 7-11. omconfig rac rmdialoutuser
name=value pair
username=<text>
index=<n>
Example Command
The following example sets one name=value pair.
Type:
omconfig rac rmdialoutuser username=jdoe
The following message appears:
Command Successful. Please reset RAC card!
130
omconfig rac: Managing the Remote Access Controller
Description
Specifies the user name of entry which is to be deleted. If no
user name is specified, an index must be specified.
Specifies the index of the entry which is to be deleted. If no
index is specified, a user name must be specified.