Example Command - Dell Command Line Interface User Manual

Table 7-15. omconfig rac users (continued)
name=value pair
numericpagingenable=true | false
numericpagernumber=<n>
numericpagermsg=<text>
emailpagingenable=true | false
emailaddress=<text>
emailmsg=<text>
alphapagingenable=true | false
alphanumber=<n>
alphaprotocol=8N1 | 7E0
alphabaudrate=<n>
alphapagerid=<n>
apphacustommsg=<text>
alphapagerpassword=<text>

Example Command

The following example sets one name=value pair. Type:
omconfig rac users username=jdoe
The following message appears:
Command Successful. Please reset RAC card!
Description
true: Enables numeric paging.
false: Disables numeric paging.
Sets the numeric pager number.
Sets the numeric pager message.
true: Enables e-mail paging.
false: Disables e-mail paging.
Sets the e-mail address.
Set the e-mail message.
true: Enables the alpha paging.
false: Disables the alpha paging.
Sets the alpha number.
Sets the alpha protocol.
Sets the alpha baud rate.
Sets the alpha pager ID.
Sets the alpha custom message.
Sets the alpha pager password.
omconfig rac: Managing the Remote Access Controller
133