Adding Maintenance Information; Example Command For Adding Maintenance Information - Dell Command Line Interface User Manual

Adding Maintenance Information

Maintenance refers to activities required to keep the system in good working order. Table 5-5 shows the
valid parameters for adding maintenance information.
Table 5-5. omconfig system assetinfo info=maintenance
Command Command
level 1 level 2
omconfig
system

Example Command for Adding Maintenance Information

To provide a value for a maintenance parameter, type a command of the form: omconfig system
assetinfo info=maintenance <name=value pair 2>. For example, type:
omconfig system assetinfo info=maintenance startdate=012504
The following message appears:
Asset information set successfully.
You can enter more than one omconfig system assetinfo command at the same time, as long as all of the
parameters for name=value pair 2 belong to the same name=value pair 1. For an example, see "Example
Commands for Adding Acquisition Information."
106
omconfig system assetinfo: Editing Cost of Ownership Values
Command name=value pair 1
level 3
assetinfo
info=maintenance
name=value pair 2
enddate=<enddate>
provider=<provider>
startdate=<startdate>
restrictions=<string>
Use
Date the extended warranty
agreement ends.
Business entity providing the
maintenance service.
Date the maintenance begins.
Activities not covered by the
maintenance contract.