Help With The Omconfig Rac Command; Omconfig Rac Authentication; Local Operating System Authentication - Dell Command Line Interface User Manual

Help With the omconfig rac Command

Use the omconfig rac -? command to get a list of the available commands for omconfig rac.
Use omconfig rac <command level 3> -? to see a list of name=value pairs that you may need to use with
dialinusers, dialoutusers, modem, network, remote, and so on.
Type:
omconfig rac dialinusers -?
The following is an excerpt of the Server Administrator response:
dialinusers Set dial-in user properties.
Valid parameters are:
username=<text:Reqd>
index=<number:0-15>
password=<text>
callbacknumber=<number>
callbacktype=<text>

omconfig rac authentication

Use the omconfig rac authentication command to specify whether you want to enable local operating
system authentication of a system that is seeking to use the remote access interface. To enable local
operating system authentication, type:
omconfig rac authentication localauthenable=true
To disable local operating system authentication, type:
omconfig rac authentication localauthenable=false

Local Operating System Authentication

Use the omconfig rac authentication command to determine whether local operating system
authentication of users is enabled or disabled for the remote access controller.
The RAC has two methods of authenticating user access: RAC authentication and local operating system
authentication. RAC authentication is always enabled. Administrators can set up specific user accounts
and passwords that allow access to the RAC.
Operating systems also require administrators to define different levels of users and user accounts; each
user level has different privileges. Local operating system authentication on the RAC is an option for
administrators who do not want to define one set of privileges for users in the operating system and a
separate set of users and accounts for the RAC. If you enable local operating system authentication for
the RAC, you enable any user with Administrator status on the operating system to log into the RAC.
omconfig rac: Managing the Remote Access Controller
121