Changing Switch Settings - NEC VERSA 6220 User Manual

T
setting the switch
T
reassembling the unit and updating the BIOS
T
resetting the switch.

Changing Switch Settings

Use the following steps to change switch settings.
1. Make sure the system is powered off and that no peripheral devices are
attached.
2. Locate and remove the two Phillips-head screws on the bottom of the
Versa that secure the speaker caps.
Put the screws in a safe place for reassembly.
Turn the NEC Versa over and open the LCD panel.
3.
Locating the speaker cap screws
Using Your NEC Versa 4-53