SOLD BY laptopia2005 DO NOT RESELL!!
Changing Switch Settings
Use the following steps to change switch settings.
1.
Make sure the system is powered off and that no peripheral devices are attached.
Locate and remove the two Phillips-head screws on the bottom of the Versa
2.
6220/30/60 that secure the speaker caps. Put the screws in a safe place for
reassembly.
Figure 2-13 Locating the Speaker Cap Screws
3.
Turn the NEC Versa notebook over and open the LCD panel.
Figure 2-14 Removing the Speaker Caps
SOLD BY laptopia2005 DO NOT RESELL!!
Setup and Operation
2-17